Kramer Electronics VM-1055 - Manual (Page 14)

12 VM-1010, VM-1021, VN-1055, VM-54 - Your VM-1021
5.2 Connecting the VM-1021
Always switch off the power to each device before connecting it to your
VM-1021. After connecting your VM-1021, connect its power and then
switch on the power to each device.
To connect the VM-1021 as illustrated in the example in Figure 6 :
1. Connect a video source to the INPUT BNC connector (for example, a
composite video player).
2. Connect the OUT SET BNC connectors to up to 20 video acceptors, 4 sets
of 5 devices (for example, composite video recorders or displays).
3. Adjust the COUPLING and CLAMP for the unit and the equalization (EQ)
and level (LEVEL) for each of the 4 sets of 5 devices as needed.
Figure 6: Connecting the VM-1021
i