Kramer Electronics PT-102S User Manual

Page 10

Using the PT102VN 1:2 Video DA

KRAMER ELECTRONICS, LTD.

To form a 1:10 DA, do the following:

1. Connect a source to the INPUT BNC connector of the

PT102VN.

2. Connect the OUT 1 BNC connector of the

PT102VN to the INPUT BNC

connector of the first

105VB.

3. Connect the OUT 2 BNC connector of the

PT102VN to the INPUT BNC

connector of the second

105VB.

4. Connect the 5 OUT BNC connectors of the first

105VB to the video

acceptors 1 to 5, and connect the 5 OUT BNC connectors of the second

105VB to the video acceptors 6 to 10.

5. Connect the 12V DC power adapter to the power socket and connect the

adapter to the mains electricity (for the

PT102VN and both 105VB units).

6. Adjust the output signal level and/or cable compensation equalization

level of the

PT102VN, if required.

Figure 6: Increasing the Outputs: arranging a 1:10 DA