Nippon Aviotronics Multi-Function LCD Projector MP-50E - Manual (Page 51)

E-51
Basic Operation
■ Quick Menu
The Quick menu has frequently used items. This section describes the items and functions
that can be set on the Quick menu.
Press the
MENU button (or the
MENU
button on the remote controller) to display the quick menu.
Description of Menu Items
◆ When OHP Is Selected
◆ When the OHP stored image Is Displayed
◆ When PC Input Is Selected
◆ When VIDEO Input Is Selected
No quick menu.
Quit
QUICK MENU
Display the previous stored image
Display the next stored image
Stored images clear all
Quit
QUICK MENU
Picture in Picture ON / OFF
Quit
QUICK MENU
Movie mode Full / Window
Scanner lamp ON / OFF
Stored images clear all
Menu Item
Display the next
stored image
Display the
previous stored
image
Stored images
clear all
Setting Item
ON/OFF
Setting Item
–
–
–
Description
Displays the image following the
currently displayed image from
stored image.
Displays the image previous to the
currently displayed image from
stored image.
Deletes the entire OHP stored
images from the internal memory.
Menu Item
Movie mode
Scanner lamp*
Stored images
clear all
Setting Item
Full/Window
ON/OFF
–
Description
When “Full” is selected:
The entire projected image shows
the video image. The document
scanning speed is 1 frame per
second.
When “Window” is selected:
The window on the bottom right side
of the projected image shows the
video image. The document
scanning speed is 20 frames per
second.
Sets whether the OHP scanner
lamp is on or off.
Deletes the entire OHP stored
images from the internal memory.
Menu Item
Picture in Picture*
* Does not display without input from the computer.
* If the ambient temperature is low when the scanner lamp is
turned ON, the OHP images will appear a little red.
Description
Set this item to ON todisplay
images, from the video source that
is connected, in the window on the
lower right side of the projected
image.