Nippon Aviotronics Multi-Function LCD Projector MP-50E - Manual (Page 38)

E-38
5
Adjust the zoom ratio.
You can adjust the zoom between 1x to 4x.
Pressing the
ZOOM button (or the button on the remote
controller) reduces the image, and pressing the ZOOM button (or
the button on the remote controller) enlarges the image.
6
Move the zooming position.
Press the arrow buttons on the remote controller to move the
zooming position of the image. You can move in eight
directions. (Up, down, left, right and diagonally).
7
Synchronized Adjustments
Press the RESIZE button to do automatic synchronous
adjustments of each setting to the most suitable status on the
“Sync Adjust” menu (Page E-44).
8
Display the pointer.
Press the SET/POINTER button to display the pointer. Press
it again to hide the pointer.
Press the SCROLL button to move the pointer.
NOTE
Adjusting the zoom or the brightness while the pointer is displayed may cause it to disappear momentarily, but it
will reappear after a short time.
Main Unit Operation
Remote Control Operation
ZOOM
ZOOM
Main Unit Operation
Remote Control Operation
SCROLL
POINTER/
SET
Main Unit Operation
Remote Control Operation
RESIZE
RESIZE
Main Unit Operation
Remote Control Operation
SET
POINTER
POINTER/
SET