EZ Dupe Daisy Chain 10 Copy DVD/CD Duplicator - Features 24X Drives & Includes 500GB HDD - Manual (Page 16)

15
 press , to set seconds
• Note: If you set the function off , the LCD screen will not show how many blank discs
are detected in writer trays.
11.3 Startup Menu
Select which function in the menu to see first when the duplicator is turned on.
 press ENT

press , to select function
11.4 Write Method
You can select which mode to duplicate CD from “DAO” (Disc At once), “SAO”
(Session At Once), and “TAO” (Track At Once). The default mode is “DAO”.
 press ENT

press , to select
11.5 Button Beep
Choose whether to hear a beep when you press a button or not.
 press ENT

press , to select ON/OFF
11.6 Read Error Skip
Choose to stop the duplicating process when error has occurred.
 press ENT

press , to select ON/OFF
11.7 Eject on Start
You can choose whether or not to eject the disc when powering up the system.
 press ENT

press , to select Eject All/No Eject/ Eject Target/ Eject Source
11.8 Boot Password
You can setup the boot password to prevent anyone from using the system.
 press ENT

press , to select Disable/Enable
If you select Disable, you will go back to 8.Boot Password:
If you select Enable, you will need to choose a password:
Use , to select the character you want.
[Setup]
3. Startup Menu
[Startup Menu]
1. Copy Disc
Write Method
DAO
[Setup]
4. Write Method
Button Beep
ON
[Setup]
5. Button Beep
Skip Read Error
ON
[Setup]
6. Read Error Skip
Eject On Start
Eject All
[Setup]
7. Eject On Start
Boot Password
== > Disable
[Setup]
8. Boot Password
[Setup]
8. Boot Password
Boot Password
= = > _