EZ Dupe Daisy Chain 10 Copy DVD/CD Duplicator - Features 24X Drives & Includes 500GB HDD - Manual (Page 14)

13
10.4 Eject All Discs
Ejects disks, including master source disc and discs in writer trays.
 Press ENTEject all discs
10.5 Disc Info
This feature allows checking disc’s basic information, such as the disc type, data
length, and available capacity.
 press ENT
10.6 Drive Info
This feature allows checking the duplicator’s major component information, such as
its manufacturer, Writer or Reader model number and version.
a. Press ENT and then press up or down to check each Drive’s model number and
information.
b. The duplicator will assign each drive a number from #1to#12. #1 is Reader. #2~#12
are writers.

press ENT
 press ,to select different Drives
10.7 System Info
This feature provides information about the duplicator, such as the controller model
number, RAM capacity, and Firmware version
 press ENT
 press ,to select different Drives
10.8 Update BIOS
When manufacturer’s certified update CD is inserted, this operation will
automatically update your duplicator’s software.
a. Turn on the duplicator select 10. Utility, and press ENT,
b. Insert an update CD to any Drive
c. Select 8. Update BIOS and press ENT
d. The system will then start executing the firmware update. When finished, the
updated CD will automatically eject.
e. In 1 min, the system will re-boot. The new firmware update is complete.
 Insert update CD

press ENT

100%

eject CD

System re-boot
[Utility]
4. Eject All Disc
[Utility]
5. Disc Info
[1] 79:59
CD-R Use 27:53
[Utility]
6. Drive Info.
[#1] Port 8.0 3.38
DVD-ROM Max 16 X
[Utility]
7. System Info.
P762NDVD 1.26
[Utility]
8. Update BIOS
Upgrade BIOS
Waiting Disc………
Start Update
Writing 5%
Start Update
Pass
New BIOS updated
Restart System