Chemglass CG-2037-E - Manual (Page 4)

[4]
Precautions:

The Stirrer should be placed in a clean and dry environment. The ambient
temperature should
not exceed 40˚C.

Large fluctuations of voltage may cause an unstable speed, so if needed; use of a
regulated power supply is suggested.

Avoid using the Stirrer in a severely corrosive environment.

If the agitating medium is volatile and/or flammable, be cautious that electric sparks
may cause explosions or fires.
1. Overhead Stirrer
2. Speed controller
3. Speed range shift plate
4. Chuck
5. Stirrer propeller
6. Base
7. Vertical Support rods
8. Support clamp
9. Horizontal Holding rod
10. Power indicator lamp
11. Power switch
12. Speed display
13. Speed control knob
Figure 1