SawStop 1.75HP - Manual (Page 5)

SawStop 10” Professional Cabinet Saw 3
Table of Contents
Using Your Saw 42
Adjusting the Blade Height 42
Adjusting the Blade Tilt Angle 42
Turning on Main Power and Starting the Motor 43
System Status Codes 45
Using the Blade Guard 48
Using the Riving Knife 50
Using the Miter Gauge 50
Cross-Cutting 52
Using a Fence 53
Rip Cutting 54
Using the Saw in Bypass Mode 57
Using a Mobile Base 58
Using an Out-Feed Table 59
Changing the Brake Cartridge 60
Installing a Brake Cartridge 63
What to do if the SawStop® Safety System Activates 64
Making Adjustments to Your Saw 65
Aligning the Table 65
Aligning the Blade to the Tilt Axis 69
Aligning the Blade Elevation Assembly 72
Adjusting the Elevation Limit Stops 74
Adjusting the Tilt Limit Stops and Tilt Angle Indicator 75
Adjusting the Table Insert 77
Aligning the Riving Knife and Spreader to the Blade 79
Adjusting the Quick-Release Clamp 82
Adjusting the Miter Gauge 83
Adjusting the Motor Belt Tension 84
Adjusting the Tilt Gearing 84
Adjusting the Elevation Gearing 85