Installing your mobile base – SawStop Mobile Base User Manual

Page 4

Installing Your Mobile Base

Fig. 4a

Fig. 5

3 SawStop Contractor Mobile Base

4. Each end of the wheel support has a cylindrical projection. Mount the wheel support to the left side of the stand

by inserting the cylindrical projections into corresponding mounting holes in the legs of the stand, and then

securing the support to the stand with two M8 x 20 button head socket screws, two M8 lock washers, and two

M8 washers, as shown in Figs. 4a and 4b. Fully tighten the two M8 x 20 button head socket screws using a 5

mm hex key. When you mount the support to the stand, make sure the foot pedal is extending out to the left.

5. Position the caster support plate on top of the

caster support as shown in Fig. 5. Note that

the connecting lever on the caster support

and the SawStop logo on the support plate

both face up. Secure the support plate to the

caster support with two M6 x 40 hex bolts,

two M6 washers, and two M6 flange lock

nuts. Fully tighten the two M6 x 40 hex bolts

using two 10 mm wrenches.

connecting

lever

caster support

plate

caster

support

Fig. 4b

cylindrical

projection

mounting

hole