RMS Technologies R325 DRIVER W/PDT User Manual
Page 2
RMS Technologies
Page 2
Version 1.21
R325 Single Axis Driver Manual
10/1/2007
Thank you for purchasing the R325 Single-Axis Driver. This product is warranted to
be free of manufacturing defects for one (1) year from the date of purchase.
Technical Support for RMS Technologies
By Telephone: 877-301-3609
(Mon.-Fri., 8:00 a.m.-5:00 p.m.)
On the Web:
www.rmsmotion.com
Via Email:
PLEASE READ BEFORE USING
Before you start, you must have a suitable step motor, a DC power supply suitable
for the motor and a current resistor. The power supply voltage must be between 4
times and 20 times the motor's rated voltage.
DISCLAIMER
The information provided in this document is believed to be reliable. However, no
responsibility is assumed for any possible inaccuracies or omissions. Specifications
are subject to change without notice.
RMS Technologies reserves the right to make changes without further notice to any
products herein to improve reliability, function, or design. RMS Technologies does
not assume any liability arising out of the application or use of any product or circuit
described herein; neither does it convey any license under its patent rights, nor the
rights of others.
Note: This equipment has been tested and found to comply with the limits for a
Class (A) digital device, pursuant to part 15 of the FCC Rules. These Limits are
designed to provide reasonable protection against harmful interferences when the
equipment is operated in its installation. This equipment generates, uses and can
radiated radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. If this
equipment does cause harmful interference the user will be required to correct the
interference.
This Class (A) digital apparatus complies with Canadian ICES-003
Cet appareil numérique de la classe (A) est conforme à la norme NMB-003 du Canada
Special Symbols
Indicates a WARNING and that this information could prevent
injury, loss of property, or even death (in extreme cases).