RMS Technologies R325 DRIVER W/PDT - Manual (Page 15)

RMS Technologies Page 15 Version 1.21
R325 Single Axis Driver Manual 08/23/2007
11. Appendix A: Recommended Cable
Recommended Cable Configurations: DC Supply to Driver
Cable length, wire gauge and power conditioning devices play a major role in the performance
of your RMS Technologies Driver and Motor.
NOTE: The length of the DC power supply cable to the Driver should not exceed 50 feet.
Example A – Cabling Under 50 Feet, DC Power
Example A demonstrates the recommended cable configuration for DC power supply cabling
under 50 feet long. If cabling of 50 feet or longer is required, the additional length may be
gained by adding an AC power supply cable.
Correct AWG wire size is determined by the current requirement plus cable length. Please see
the Driver Supply Cable AWG Table in this Appendix.