Alpine DVA-5205P - Manual (Page 41)

41
Adjusting the
parametric equalizer
Adjusting the parametric equalizer
Select “PARAMETRIC-EQ” under
“Operating the digital audio
processor (optional)” on page 40.
Use the “Joystick” to select the
band to be set, then press “ENT”.
The band whose frequency is indicated in
yellow can be adjusted. The parametric
equalizer’s setting screen consists of two
pages. Press “BAND” for at least 2
seconds to switch between pages 1 and
2.
Use the “Joystick” to select the
band width (Q-FACT), then press
“ENT”.
Use the “Joystick” to adjust the
band width, then press “ENT”.
Use the “Joystick” to select the
level (LV), then press “ENT”.
Use the “Joystick” to adjust the
level, then press “ENT”.
Note: Press “RTN” to return to the previous
screen.
Press “A.PROC”
to close the
digital audio
processor screen
and return to the play-
back screen.
Use the “Joystick” to adjust the
frequency, then press “ENT”.
ENT
ENT
ENT
ENT
ENT
ENT
ENT
ENT
ENT
ENT
ENT
ENT
A. PROC
BAND
V. SEL
A. PROC
BAND
V. SEL