Set up, Changing the tv screen settings – Alpine DVA-5205P User Manual

Page 26

Text mode
Original mode

SET UP

Changing the TV
screen settings

Use the procedure described below to set
the output screen according to the type of
TV monitor being used.

Changing the TV screen settings

Select “TV SCREEN” under
“Changing the default settings
(SET UP)” on page 24.

4 : 3 PAN-SCAN

Use the “Joystick” to
make the selection,
then press “ENT”.

Select this when connected to a conventional
4:3 size monitor. The picture will fill the entire
TV screen. However, due to the mismatch in
aspect ratio, parts of the movie at the extreme
left and right sides will not be visible.

Select this when connected to a conventional
4:3 size (normal TV aspect ratio) monitor.
There may be black stripes visible at the top
and bottom of the screen. The width of these
stripes will depend upon the original aspect
ratio of the theatrical release of the movie.

ENT

BAND

RTN

V.OUT

CLR

DISP

SET

ENT

4 : 3 LETTERBOX