Alpine DVA-5205P - Manual (Page 30)

30
SET UP
ENT
DISP
MENU
SET
BAND
RTN
V.OUT
ENT
ENT
The digital signals recorded on the DVD
disc with 96 kHz/24bit, 48 kHz/24bit, 48
kHz/20bit sampling are converted into
digital signals with 48 kHz/16bits
sampling for output from the optical cable.
Set to ON at time of shipment from
factory.
The digital signals recorded on the DVD
disc with 96 kHz/24bit, 48 kHz/24bit, 48
kHz/20bit sampling are not converted into
digital signals with 48 kHz/16bits
sampling. They are not output from the
optical cable.
Select “DOWN SAMPLING” under
“Changing the default settings
(SET UP)” on page 24.
Move the “Joystick” up and
down to choose “ON” or “OFF”
and, then press “ENT”.
Changing the down
sampling setting
Converts linear PCM (LPCM) voice
signals recorded on the DVD disc to
downsampling 48 kHz/16 bit digital
signals and outputs them from the optical
cable.
OFF
ON
Changing the down sampling setting