Radio operation – Audiovox MVS6950 User Manual

Page 27

Tuning into a station manually

Press

FUNCTION button until the frequency

band appears on the display.
Press the

BAND button to select the desired

band.
Press the

TUNING button to tune in

the desired station.

FM Stereo

Press the

FM MODE button on the remote

until " " appears on the display.

Weak FM stations

Press the

FM MODE button on the remote

until the " " word appears on the display.
Background noise will be reduced but the signal
reproduced will be mono. To restore stereo
reception, press the

FM MODE button on the

remote to select STEREO.

Tuning into a preset station

Press

FUNCTION button until the frequency band appears on the display.

Press the

BAND button to select the desired band.

Press the

PLAY (PRESET) button to select the presetted station or use the numbered buttons

to enter the number to select the presetted station.

To select preset number 15, press the +10 and 5 buttons.
To select preset number 10, press the +10 and 0 buttons.

1.
2.

Presetting stations

You can tune into a stored station directly by entering the preset number.

20 stations on FM band can be preset.
20 stations on AM(MW) band can be preset.
Press

FUNCTION button until the frequency band appears on the display.

Press the

BAND button to select the desired band.

Press the

PLAY (PRESET) button or number button to select the preset number.

Use the

TUNING button to find your desired station.

Press the

MEMORY button twice on the remote.

Repeat steps 2-5 to store other stations

1.
2.
3.
4.
5.
6.

Example:

Material: 80g White Woodfree Paper
Print: Black Color
Size: 210 x 148 mm
(*Print black text on white background)

0 m

148 mm

RADIO OPERATION

To search for a station automatically

Hold down the

TUNING buttons on the remote or SKIP buttons on the front

panel for 1 to 2 seconds, and a station is searched for automatically. After tuning in a station,
the search stops.
The search may not stop at a station with a very weak signal.