Rugged Ridge Factory Replacement Soft Top Hardware, 87-95 Jeep Wrangler (YJ) - Manual

69999 Page 1 of 7 02/05
PART NUMBER: 13510.01
INCLUDED COMPONENTS
DESCRIPTIONS QTY
Bow Assembly 1 5/16” Tapping Plate 12
Windshield Channel 1 5/16” Flat Washers 12
Side Belt Rail (Left & Right) 2 5/16” Torx Screws 12
Corner Belt Rail (Left & Right) 2 #8 x 1” Sheet Metal Screw 2
Tailgate Brackets (Left & Right) 2 #8 x ½” Sheet Metal Screw 8
Connection Tubes 2 #8 x ¼” Sheet Metal Screw 11
#10-24 x ½” Phillips Machine Screws 4 Tailgate Bar with Tonneau (optional) 1
#10-24 Nylock Nuts 4 Side Belt Rail Pin 2
#10 Flat Washers 4 Upper Door Windshield Insert 2
#10 Star Lock Washers 4 (Passenger & Driver)
Installation Instructions
Replacement Soft Top Hardware
87-95 Wrangler
IMPORTANT NOTICE:
Carefully read instructions before attempting to install this product. Rugged Ridge is in no way responsible for
any damage to the vehicle or personal injury that may occur during the installation or use of this product.
DRILLING REQUIRED
WARNING!
This product is designed to enhance the appearance of the vehicle and only for protection against the
elements. Do not rely on this product to contain occupants within the vehicle or to protect against injury during
an accident.
WEAR SEAT BELTS AT ALL TIMES