beautypg.com

Optional painting instructions – Rugged Ridge All Terrain Fender Flare Kit, 87-95 Jeep Wrangler (YJ) User Manual

Page 3

background image

OPTIONAL PAINTING INSTRUCTIONS

NOTICE: Do not use any harsh chemicals on flares. Use only plastic approved cleaning chemicals.

CUT OUT FLARE PAINT PREPARATION:

Step 1. Lightly sand flares with 320 grit sandpaper.

Step 2. Remove all surface contaminants from flares

using an approved grease and wax remover.

Step 3. Wipe flares with a tack rag to remove any dust

or dirt.

PAINTING

Step 1. Apply two even coats of adhesion promoter to

flares. Allow recommended flash time between

coats. Let second coat dry for 15 minutes before

primer application.

Step 2. Apply an even coat of primer to flare surface.

( A high build primer is recommended. )

Step 3. Paint flares with a automotive grade paint.

( A flex additive must be added to paint. )

11632.10

11633.10

Page 3 of 4

REV 11/13/09

YJ:

CJ: