beautypg.com

Rugged Ridge Front Tube Doors, Textured Black, 07-14 Jeep Wrangler (JK) User Manual

Page 3

background image

1.

With tube doors installed, hold Anti-Rattle Bumper between the

door and vehicle door jamb. Close the door and adjust the location of

the bumper to achieve a snug fit. Mark the location of the Anti-Rattle

Bumper using tape. Open door and mark the center of the bumper with

a center punch to prepare for drilling.

2.

Drill a 3/32” hole and attach the bumper with the supplied sheet

metal screw. Do not overtighten. The attachment screw can be

loosened or tightened as necessary to adjust the length of the Anti-

Rattle Bumper.

OPTIONAL RUBBER BUMPER INSTALLATION

After installing Tube Doors, optional Anti-Rattle Bumpers can be installed.

Page 3 of 3

For assistance, please contact Omix-ADA Technical Support department

(770) 614-6101

[email protected]

© Copyright 2010, Omix-Ada