Rugged Ridge Cold Air Intake Kit, V8, 93-98 Jeep Grand Cherokee (ZJ) User Manual
Page 2
Page 2 of 3
4. Align holes in throttle body, spacer and gaskets and reinstall throttle body bolts. Hand tighten all bolts snug
before tightening evenly to 9 ft-lbs. Remove the original round rubber gasket from the top of the throttle body
and replace with the supplied 6” round rubber gasket.
5. Remove bolt securing the OE plenum support bracket from the throttle body and instal the supplied
1/4-20x2.5” threaded stud in its place. A small amount of thread locker is suggested. Next install Plenum
Support, flange up, over the threaded stud. The bottom of the Plenum Support may have to be trimmed
due to varing heights of throttle bodies to acheive the correct seal between the plenum and throttle body.
3. Remove (4) throttle body bolts and set aside. Lift throttle body to install Throttle Body Spacer underneath.
Place a Throttle Body Spacer Gasket on top and bottom of Throttle Body Spacer to install being sure to discard
the original gasket.
- HD Steering Box Mount, 76-86 Jeep CJ Models (4 pages)
- Manual Locking Hub Set, 86.5-93 Nissan Frontier, Pathfinder, & Xterras (1 page)
- Manual Locking Hub Conversion Kit, 90-97 Ford, Mazda SUV & Pickup (2 pages)
- AMC20 Heavy Duty Differential Cover (1 page)
- Dana 44 Heavy Duty Differential Cover (1 page)
- Differential Skid Plate, Dana 30 (1 page)
- Differential Skid Plate, Dana 44 (1 page)
- Heavy Duty Steering Box Brace, 84-01 Jeep Cherokee (XJ) (3 pages)
- Differential Skid Plate, Jeep logo, Dana 44 (1 page)
- Dana 30 Heavy Duty Differential Cover (1 page)
- Dana 35 Heavy Duty Differential Cover (1 page)
- Differential Skid Plate, Dana 35 (1 page)
- Manual Locking Hub Set, 86-93 Nissan Pathfinder & Pickup (1 page)
- Manual Locking Hub Set, 90-94 Nissan Patrol (1 page)
- Heavy Duty Steering Box Brace, 76-86 Jeep CJ Models (3 pages)
- Differential Skid Plate, Jeep logo, Dana 30 (1 page)
- Dana 60 Heavy Duty Differential Cover (1 page)
- Differential Skid Plate, Jeep logo, Dana 35 (1 page)
- Tail Light Euro Guards, Black, 07-14 Jeep Wrangler (3 pages)
- Headlight Euro Guards, Black, 07-14 Jeep Wrangler (3 pages)
- RRC Side Armor Guards, 07-14 Jeep Wrangler Unlimited (JK) (1 page)
- Euro Style Turn Signal & Side Marker Guard,07-14 Jeep Wrangler (JK) (3 pages)
- RRC Side Armor Guards, 07-14 Jeep Wrangler (JK) (1 page)
- RRC Rocker Guards, Black, 07-14 Jeep Wrangler Unlimited (JK) (1 page)
- 3-Inch Round Tube Steps, Black, 07-14 Jeep Wrangler Unlimited (JK) (2 pages)
- 4 1/4-inch Oval Tube Side Steps, Black, 07-14 Wrangler Unlimited (JK) (2 pages)
- Steering Component Skid Plate, 07-14 Jeep Wrangler (JK) (2 pages)
- Rear Corner Guards, Body Armor, 97-06 Jeep Wrangler (2 pages)
- Rocker Side Panels, Body Armor, 97-06 Jeep Wrangler (TJ) (2 pages)
- Front Fender Guards, Body Armor, 97-06 Jeep Wrangler (2 pages)
- Corner Guards, Body Armor, 07-14 Jeep 4-Door Wrangler (JK) (2 pages)
- Hood Guard, Body Armor, 07-14 Jeep Wrangler (1 page)
- Tail Light Euro Guards, 07-14 Jeep Wrangler (JK) (3 pages)
- Euro Guard, Turn Signal, Black, 07-14 Jeep Wrangler (1 page)
- RRC Side Armor Guards, 87-06 Jeep Wrangler (1 page)
- RRC Rocker Guards, Black, 07-14 Jeep Wrangler (JK) (1 page)
- 3-Inch Round Side Steps, Black, 07-14 Jeep 2-Door Wrangler (JK) (2 pages)
- 4 1/4-inch Oval Tube Side Steps, Black, 07-14 Jeep Wrangler (JK) (2 pages)
- 6-Piece Body Armor Kit, 97-06 Jeep Wrangler (TJ) (10 pages)
- Rear Corner Guards, Body Armor, 97-06 Jeep Wrangler (TJ) (2 pages)
- Corner Guards, Body Armor, 07-14 Jeep 2-Door Wrangler (JK) (2 pages)
- Side Marker Light Euro Guards, Black, 07-14 Jeep Wrangler (2 pages)
- Fog Light Euro Guards, Black, 07-14 Jeep Wrangler (2 pages)
- 3-Inch Round Tube Side Steps, Black, 97-06 Jeep Wrangler (TJ) (2 pages)
- Gas Tank Skid Plate, 97-06 Jeep Wrangler (TJ) (3 pages)