beautypg.com

Rugged Ridge Tire Carrier, XHD Rear Bumper, 07-14 Jeep Wrangler (JK) User Manual

Page 3

background image

Page 3 of 9

5. Fasten Spare Tire Mount Assembly from Step 4 to the Frame (#1) using (3) M12 Hex Bolts (#7),

(6) M12 Washers (#6), and (3) M12 Lock Nuts (#14) as shown.

6. Install Ramp (#22) onto Frame (#1) using (2) M6 Socket Cap Screws (#21) and (2) M6 Washers (#20)

as shown. Shims (#25) may have to be added later during adjustment.

7. Install (2) Bumper Stops (#24) onto Frame (#1) using (4) M6 Hex Bolts (#27) and (4) M6

Washers (#20) as shown. Leave fasteners loose, as they will need to be adjusted to the vehicle later.

8. Pack (2) Bearings (#12) with all purpose grease. Install (1) Bearing onto spindle of Pivot Mount (#2).