Martin Universal Design U-DS40 SMART TABLE - Manual

4444 Lawton Avenue, Detroit, MI 48208 USA • Tel:(313)895-0700/Fax:(313)895-0709
Email: [email protected] • visit us at www.MartinUniversalDesign.com
U-DS40 SMART TABLE • Assembly Instructions
IMPORTANT
If you have difficulty assembling your U-DS40 Smart Table or need customer service assistance.
Please call: Martin Universal Design, Inc. Customer Service Hot Line at 1-313-895-0700.
If you need additional parts, it is not necessary to contact your dealer, our Customer Service Rep.
will forward them to you immediately.
03/2009- RPI
Parts List
[1 ea] - 24” x 36” Top [2 ea] - Top & Base Supports
Pg. 1
A B C
[2 ea] - Legs
[1 ea] -Base Cross Support [4 ea] - Feet
D F
[2 ea] - Upper Legs
E
[2 ea] - Collars [2 ea] - Tilt Arms
G I
[1 ea] - Pencil Edge
H
J L K
[2 ea] - Knobs [8 ea] - Screws (6x25mm) [6 ea] - Allen Bolts (6x40mm)
M O N
[2 ea] - Allen Bolts (6x12mm) [2 ea] - Screws [4 ea] - Nuts
P1 Q P2
[4 ea] - Small Washer [2 ea] - Large Washer [1 ea] - Wrench
R
[1 ea] - Allen Wrench
NOTE: READ ALL ASSEMBLY INSTRUCTIONS FIRST
BEFORE ATTEMPTING TO ASSEMBLE U-DS40 SMART TABLE.
- TWO PEOPLE NEEDED FOR TABLE ASSEMBLY -