Martin Universal Design U-DS24 BERKELY MAXUM SHELF - Manual

BERKELEY MAXUM U-DS2450 SHELF ASSEMBLY
Martin Universal Design, Inc. • 4444 Lawton Avenue, Detroit, MI 48208 USA
Tel: (313)895-0700 / Fax:(313)895-0709 • E-mail: [email protected]
ONE YEAR GUARANTEE
This Martin Universal Design, Inc. product has a one year guarantee to
be free from manufacturers defects during that period of use by the
original purchaser. Items or parts subjected to extreme temperature or
abuse or use of this product other than manufacturers intended purpose
is not covered under this guarantee.
ITEM # PARTS LIST QTY
U-DS2450 “
1
” Brace/Bracket 1
84-1248 Shelf 1
Phillip Screws 7
U-DS2450 - “I” Bracket
84-1248 - 12” x 48” Shelf
[7] - Phillip Screws
Fig. 1 Fig. 1 Fig. 1 Fig. 1 Fig. 1
1. Take the shelf and look to see which side is the
best looking. Lay the best side face down onto a
carpeted surface.
Fig. 2 Fig. 2 Fig. 2 Fig. 2 Fig. 2
2. Place the “I” Bracket down onto the shelf and
center it as shown above.
Fig. 3 Fig. 3 Fig. 3 Fig. 3 Fig. 3
3.Tap a nail with a hammer into each screw hole
in the bracket shown above. This will break the
surface a bit to allow for easier attachment
of the screws.
STOP
PLEASE DO NOT RETURN THIS TABLE to the
Store where you purchased it. If you are
unable to assemble or parts are missing,
PLEASE Call Customer Service at
Martin Universal Design, Inc.
313-895-0700 or Email: [email protected]
Any Questions with Assembly? We Can Help
Fig. 4 Fig. 4 Fig. 4 Fig. 4 Fig. 4
4. Attach all [7] Screws to bracket and shelf. Shelf
is now ready to be added to base.
Fig. 5 Fig. 5 Fig. 5 Fig. 5 Fig. 5
5. Turn shelf
over and place
shelf onto base
by positioning
each end of the
bracket over
the top edge of
each left and
right sides of the
table base.
As shown in
FIG 5.
Enjoy!
Hammer & Phillips Screwdriver needed for assembly.
ASSEMBLY INSTRUCTIONS CONTINUED...