Minka Group F528-L-BS/CH - Manual (Page 19)

9
Step 1. (Fig 18). Apply several drops of "Loctite"
anaerobic (provided) retaining adhesive to the
threaded stud of the "Lower Decoration Assembly"
before installing it to the motor shaft.
CAUTION: CAUTION: Do not apply the "Loctite" directly to
the motor shaft threads, the adhesive can run
down through the shaft and into the motor and
damage the internal components of the motor.
Step 2. (Fig 19). Install the bottom Decoration
assembly by screwing it to the motor shaft.
FINISHING THE INSTALLATION
Fig. 18 Fig. 19
LOWER
DECORATION PLATE
LOWER
DECORA TION
ASSEMBLY
STUD