j5 create JUH410 USB 3.0 VGA & 3-Port HUB - Manual (Page 8)

USB 3.0 MULTI-ADAPTER
USER MANUAL
7
GETTING STARTED
Notes Before Installation
 Install the driver completely before inserting the USB cable into your computer
 Run the setup program as an administrator to avoid errors in installation
 Connect the VGA Cable for the display to the VGA port on the JUH410 first before
connecting the USB cable to the computer
 Un-install the previous driver first before installing the latest driver
1. Start the device driver installation (please refer to your PC system OS installation in the next
section) *Note: install driver completely before following steps 2 through 4.
2. Connect the USB 3.0 cable connector to the host laptop
3. Connect the VGA cable for the display device
4. Your USB HUB port is now ready to use
INSTALLATION FOR WINDOWS
Device Driver Installation
This section illustrates the simple device driver installation guide for Windows 8、7 operating
system. When your computer is ready to use, insert the Driver CD into the CD-ROM drive. The
setup program should be launched automatically; if it doesn’t, go to Computer, click on your
CD drive, and manually run the setup CD. Double Click on Setup.exe to start.
※
Make sure the USB cable is unplugged from your PC or Notebook before executing the