j5 create JUH410 USB 3.0 VGA & 3-Port HUB - Manual (Page 4)

USB 3.0 MULTI-ADAPTER
USER MANUAL
3
INTRODUCTIONS
Thank you for purchasing the j5create USB Multi-Adapter! This adapter acts as an external
graphics card for your MAC or PC. It allows you to add an additional display and 3 USB 3.0 ports
through your USB port.
With j5create multi-adapters, there is no need to open up your computer to add an
expensive graphics card, you simply load the drivers, plug in the adapter to the USB port, then
plug in the VGA monitor cable into the adapter and you are ready. It supports three viewing
modes: primary, extended, mirror modes. With “plug & play” functionality between your
computer and 2nd monitor or projector, you will be able to create a new visual environment
in seconds.
j5create’s elegant multi-adapter series provides you with a fast and portable alternative
solution.
System Requirements
 Microsoft Windows 8.1 / 8 / 7/ XP (32-bit or 64-bit)
 Mac OS X 10.9 / 10.8 / 10.7 / 10.6
 CPU: Intel 2 core Quad 2.33 GHz
 RAM: 2 GB DDR2
 Available USB port (USB 3.0 is recommended)
Note for Video Player:
*Windows XP users: “Windows Media Player” is recommended for video playback
*Windows XP users & MAC users: Some Windows XP & MAC products are not supported by
USB 3.0 at this time, therefore we suggest USB 2.0 for ‘office applications’ only; Video Playback
is not recommend due to USB 2.0 bandwidth limitations causing limited video performance.