Asus MAXIMUS V E7295 - Manual (Page 119)

ASUS MAXIMUS V FORMULA Series 3-27
Chapter 3
Memory Remap Feature [Enabled]
Allows you to enable remapping the memory above 4GB.
[Enabled]
Enables the function.
[Disabled] Disables this function.
Graphics Configuration
Allows you to select a primary display from iGPU, and PCIe graphical devices.
Primary Display [Auto]
Allows you to select which of the iGPU/PCIE Graphics device should be the Primary
Display. Configuration options: [Auto] [IGPU] [PCIE]
iGPU Memory [64M]
Allows you to select the amount of system memory allocated to DVMT 5.0 used by the
iGPU.
Configuration options: [32M] [64M] [96M] [128M] [160M] [192M] [224M] [256M]
[288M][320M] [352M] [384M] [416M] [448M] [480M] [512M] [1024M]
S.M.A.R.T. Status Check [Enabled]
S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitor system. When
read/write of your hard disk errors occur, this feature allows the hard disk to report warning
messages during the POST. Configuration options: [Enabled] [Disabled]
Hot Plug [Disabled]
These items appear only when you set the SATA Mode Selection item to [AHCI] or [RAID],
and allow you to enable/disable SATA Hot Plug Support.
Configuration options: [Disabled] [Enabled]
External SATA [Enabled]
Allows you to enable or disable the support of the External SATA.
Configuration options: [Disabled] [Enabled]
3.5.4 System Agent Configuration