NaceCare Solutions ST765 - Manual (Page 8)

Follow these instructions carefully to avoid harm to the operator and damage to the machine
•
Read the labels on the machine with attention. Never cover them for any reason and always
~immediately replace them if they are damaged
•
Never mix different types of detergents this could generate noxious gases. Never set containers
of liquid on the machine
•
Always remove the recovery tank when performing battery recharging or maintenance.
•
Machine storage temperature must be between -25°C and +5°C
•
Optimum operating temperature is between O°C and 40°C
•
Relative humidity must be between 30 and 95%.
•
Never use the machine in an explosive environment.
•
Never use the machine to transport goods.
•
Never use acid solutions, which could damage the machine.
•
Avoid running the brushes with the machine stopped, this could damage the floor.
•
Never vacuum flammable liquids
•
Use a powder fire extinguisher in case of fire. Do not use water
•
Do not hit against shelving or scaffolding when there is a danger of falling objects.
•
Adjust operating speed according to traction conditions
•
Never exceed the maximum slope limits this could cause instability
•
Whenever you park the machine remove the key and apply the parking brake.
•
The machine must perform washing and drying operations simultaneously. Any other operations
must be done in zones where the presence of unauthorized persons is prohibited. Signal wet
floors with suitable signs.
•
Whenever the machine has operating troubles check to make sure these are not due to
insufficient maintenance.
•
When replacing machine parts always ask for ORIGINAL spare parts from your Authorized
Agent and/or Retailer.
•
Immediately engage the emergency brake in case of danger
•
Always cut out the electric power supply to the machine whenever maintenance is performed.
•
Never remove guards that require tools for removal.
•
Never wash the machine with direct or pressurized jets of water or with corrosive substances.
•
Have you’re nearest service center check the machine every 200 operating hours.