NaceCare Solutions JV2000 - Manual

NACECARE SOLUTIONS
Jet Vac 2000
SI Specification
NOTE: As with all electrical equipment, care and attention must be exercised at all times
during its use, in addition to ensuring that routine and preventative maintenance is carried out
periodically in order to ensure its safe operation. In particular the electrical supply cable and
flexible hose should be regularly inspected by a competent person and immediate action taken to
rectify any faults found. Failure to carry out maintenance as necessary, including replacement of
parts to the correct standard, could render the equipment unsafe and the manufacturer can accept
no responsibility in this respect.
_____________________________________________________
MACHINE OPERATION
Please see the enclosed machine and accessory drawings to identify components mentioned
below.
A) ELECTRICAL SUPPLY
Before operating the machine, make sure that the electrical requirements are met. The Jet Vac
2000 is designed to operate on 115V power supply fused with a 15 amp breaker. Insert the plug
(21) into a 115V grounded outlet.
B) FILLING WITH WATER
Unscrew the valve cap (22) and add water using the fill bottle provided. When the boiler is full,
the valve on the fill bottle will activate, preventing overfilling.
WARNING: Do not use any chemical agents in the boiler. This could cause blockages and
deterioration of the machine and accessories rendering the product warranty null and void.