NaceCare Solutions ST765 - Manual (Page 4)

MOVING THE PACKAGED MACHINE
The machine is contained in specific packing with a platform so that a
forklift can move it. No more than two packing crates can be stacked on
each other. The total weight is 232 kg. For ST875 machines and 257 kg for
ST885.
Packing dimensions are:
A: 1.26M
B: 72
CM
C: 1.66M
HOW TO UNPACK THE MACHINE
1. Remove outer packing
2. Cut the strap holding the machine to the skid.
3. Place a ramp in front of the skid, lift the brush base up and push
the machine backwards off of the skid.
4. Be sure to keep the skid and other packing materials if you plan to
transport the machine again.
BATTERY INSTALLATION
The battery compartment is located below the recovery tank on the unit.
Use caution when lowering the batteries in to the compartment, as you do
not want to short out the battery posts.
Note: When using Wet Lead Acid batteries, be sure to follow all
manufacturers procedures for battery handling and daily maintenance.