MIPRO ACT-515 Single-Channel True Diversity Receiver - Manual (Page 9)

Instructions:
1. Press and release the 'SET' button until both CH cursor and channel number start to
blink denoting it is ready to accept parameter changes.
2. During blinking, press and release ▼ or ▲ button to autoscan for a clear,
interference-free preset channels.
or
During blinking, press and hold ▼ or ▲ button to stop one of the 8 factory preset
channels.
3. Press the 'SET' button to confirm the change.
CHANNEL Setting
Press Down Up
SET
SET
Instructions:
1. Press and release the 'SET' button until both cursor and group number start to
blink denoting it is ready to accept parameter changes.
2. During blinking, press ▼ or ▲ button to one of the 11 factory preset groups.
3. Press the 'SET' button to confirm the change.
GROUP Setting
Press Down Up
SET
SET
12 13
Diversity Wireless Systems Diversity Wireless Systems