DiGiCo SD7 - Manual (Page 17)

SD7 - Getting Started
1-13
1.5.9 Rack Sharing .........................................................................
In a multi-console system where Racks are connected with MADI and shared between two DiGiCo Consoles, only one of the
consoles can take control of the rack, with respect to Gain, Phantom Power and Pads. To overcome this, it is possible to place the
SD7 into one of 3 states of operation:
Isolate : The SD7 will not communicate with the rack and therefore any adjustment of input gain or +48V switch will have no
effect on the rack settings
Receive Only : The SD7 will receive the rack’s existing settings but will not be able to control the gain etc on the racks.
Full Control : The SD7 will send its settings to the racks and change them accordingly.
Sharing is configured in the Rack Sharing area, found in bottom right-hand corner of the window when the Splits & Sharing
button is selected:
These three states can be set on a per-rack basis (right column), or globally for all shared racks (left column).