DiGiCo SD11 - Manual (Page 9)

SD11 - Getting Started
1-4
Six aux sends can be displayed in the Channel Strip panel at any one time. If more than six aux sends have been created in the
session, the scroll button outside the bottom left-hand corner of the screen can be used to scroll the display through the remaining
auxiliaries.
The controls to the right of the Channel Strip panel allow the Assigned channel to be adjusted:
1.3.6 The Master Fader ..................................................................
The master group output, which is the lowest stereo group output by default, can be controlled using the master level pot next
to the touch turn encoder:
1.3.7 Other Controls .......................................................................
Below-left of the screen, there are are two modifier buttons: When pressed, the 2nd function button allows access to different
parameters:
1) Stereo Aux Pan and Pre/Post switching
2) Hard Mute of a channel
3) Fine adjustment of Delay settings on output channels
The Option/All button has 2 main functions:
1) When pressed and released, any channel that is a member of a gang will be temporarily isolated from that gang.
2) When pressed and held, any parameter that is adjusted on a single channel will also be adjusted in the same way
on all of the channels in that bank