Acer Altos G300 Series - Manual (Page 78)

4 Setup utility 66
System Hardware Monitor
If your mainboard supports hardware monitoring, these items are
auto-detected and the results are reported. You cannot make changes
to these items.
Parameter Description
Case Status The current status detected by chassis intrusion
switch.
Current CPU
Temp Current CPU temperature detected by the sensor
on the board.
Current System
Temp Current board temperature detected by the
sensor on the board.
Current CPU
Fan Speed Current CPU Fan speed detected.
Current System
Fan 1 Speed Current System Fan 1 speed detected.
Current System
Fan 2 Speed Current System Fan 2 speed detected.
BIOS SETUP UTILITY
Advanced
System Health Monitoring Hardware
____________________________________________________
Case Status Closed
Current CPU1 Temp. 36 0 C/96 0 F
Current System Temp. 26 0 C/78 0 F
Current CPU Fan Speed [4200RPM]
Current System Fan 1 Speed [0RPM]
Current System Fan 2 Speed [0RPM]
Voltage monitoring
Configure System
Health Monitoring
Hardware parameters.
Select Screen
Select Item
+ - Change Option
F1 General Help
F10 Save and Exit
ESC Exit
V02.03 'Copy right 1985-2000, American Megatrends Inc.
aa300.book Page 66 Tuesday, December 17, 2002 5:27 PM