Vaddio WEBBi User Manual

Page 18

Text mode
Original mode

WEBBi - Web Controller

Vaddio WEBBi - Web Controller - Document Number 342-0445 Rev B Page 18 of 24

Camera Controls
The user has full Pan/Tilt/Zoom controls from the Room UI page. In addition, the user has the ability to execute
six camera presets represented by buttons at the bottom of the panel. Pan/Tilt and Zoom speed can be toggled
between fast and slow by selecting the radio button in the center of the display. This sets the camera’s PTZ
speed.

The user also has the ability to set and store camera presets from this page. Steps for setting a camera preset
are as follows:

 STEP 1: Position camera to desired location within the room.

 STEP 2: Press ‘Store’ button. A pop-up will be presented. Select the desired preset to store the current

camera position. Pop-up will disappear upon selection.

 STEP 3: Operation complete. Camera will go to stored position when “Preset 4” button is pressed.