Vaddio ClearVIEW HD-20 - Manual (Page 6)

ClearVIEW HD-20
ClearVIEW HD-20 Manual 342-0169 Rev. B Page 6 of 16
First Time Set-up with the ClearVIEW HD-20:
The ClearVIEW HD-20 was designed to be exceptionally easy to use and operate. There is documentation at the
back of the manual for pin-outs for all of the connectors on the ClearVIEW HD-20 camera.
Getting Started
Step 1:
Using the HD Video Select Rotary Switch and Camera Settings Dip Switch on the back of the camera,
set up the camera’s output resolution and functional preferences. There is a label on the bottom of the camera
that identifies the choices.
Label on the Bottom of the HD-20
 Set the HD output resolution for the camera with the Rotary Switch.
 Set the IR frequency of the camera if it is to respond to the IR remote control.
 If using RS-232 for control, leave the IR OUT OFF (SW4) and choose 9600bps for most applications.
 If using the IR forwarding feature, turn the IR OUT ON (SW4).
 If inverting the camera, turn the IMAGE FLIP ON (SW6).
Dip Switches:
IR 1, 2 & 3:
The IR remote has the capability of operating up to three different PTZ cameras from one
remote. Use the selector buttons at the top of the IR remote to select the frequency.
IR Out 4:
The IR output is sent out on the RS-232 RJ-45 jack on the back of the camera. Turning on the IR
output will allow IR signals to be transmitted over the CAT-5 cable to the head end. When using RS-232
control or Vaddio CCU controllers (also via RS-232), turn the IR OUT to OFF.
Baud Rate 5:
The options for baud rate are either 9600 bps or 38,400 bps.
Image Flip 6: To invert the HD-20, turn the IMAGE FLIP ON (switch down).
HDMI Color or sRGB Color space 7: Default is YCbCr. Use sRGB color space with older DVI-D 1.0
monitors only. The YCbCr color space is best for HDMI digital video.
Switches 8, 9 and 10
: Leave up - or in the OFF position
HD Video Select Switch Camera Settings 10-Pos Dip Switch
HD-20
Rear
Panel
IR 2
ON
IR 1
ON
1
38400
bps
4
IR
OUT
ON
2
IR 3
ON
3 5 5 4 8 6 7 7 6 8
IR 2
OFF
IR 1
OFF
DIP SWITCH SETTINGS
9600
bps
IR
OUT
OFF
IR 3
OFF
HDMI
COLOR
YCbCr
IMAGE
FLIP
OFF
B 3
7
6
5
4
9 10 10 9
F
E
D
C
VIDEO SELECT
2
0
1080p/30
1 1080i/59.94
720p/59.94
A
9
8
10
OFF
8
OFF
9
OFF
1080p/25
1080i/50
720p/50
ON
1080i/60
720p/60
sRGB