Vaddio ClearVIEW HD-18 - Manual (Page 3)

ClearVIEW HD-18
ClearVIEW HD-18 Manual 341-885 Rev. C Page 3 of 14
Carefully remove the device and all of the parts from the packaging.
Unpack and identify the following parts:
• One (1) ClearVIEW HD-18 Camera
• One (1) Vaddio IR Remote Commander
• One (1) EZCamera™ Control Adapter (RJ-45 to DB-9)
• One (1) Vaddio PowerRite™ 12 VDC, 3 Amp Power Supply
• One (1) AC Cord Set (US or UK and Europe)
• Documentation and Manuals
1. Camera – A 1/3”, 1.3 megapixel HD image sensor is combined with an 18x optical zoom lens, for
capturing high-quality video.
2. Tally Light – A tally light is illuminated when the camera receives a VISCA command from an
external control system and tally is triggered.
3. IR Sensors – Dual IR sensors are built into the front of the ClearVIEW HD-18 to receive IR signals
from the IR remote control supplied with the camera.
4. Power Light – A power light is illuminated when the camera is turned on.
Compatible Switchers and Joystick Controllers:
Figure 2: ClearVIEW HD-18 camera (front)
1
2 4
3
ProductionVIEW™ HD
(999-5600-000)
Precision Camera Controller
(999-5700-000)
ControlVIEW™ XHD
(999-5672-000)