Pulsafeeder Pulsa GLM DM7 - Manual (Page 10)

10
6.3 Oil Fill and Maintenance
6.3.1 Oil Capacities
It is recommended that adequate supplies of PULSALube oil be on hand for periodic
changes and emergency requirements. The approximate amounts of oil required to fill
the GLM
®
DM7 pump to specified levels are:
Pump Capacity Gearbox, Model DM7
PULSALube EP Gear Oil 2,500 ml (2.6 Qt)
Pulsafeeder Part No. Description Container Size
NP980010-001 PULSALube EP Gear Oil 500 ml
NP980010-002 PULSALube EP Gear Oil 1 liter
NP980010-003 PULSALube EP Gear Oil 2.5 liter
NP980010-004 PULSALube EP Gear Oil 18 liter
6.3.2 Gearbox Oil Fill
Fill the gearbox with oil by removing the threaded oil fill cap on the top of the pump. Fill
with the proper oil (PULSALube EP Gear Oil) to the upper edge of the sight glass on the
side of the pump. Replace the cover or controller. Replace the oil fill cap. See figure 5.
Note that during operation, the oil should be visible at the middle of the sight glass.
Figure 5, oil filler cap and sight glass