Power Soak 31990 PS-100 Owner's Manual - Manual (Page 29)

25
A wiring diagram is located in the system’s control panel enclosure.
Specific part numbers and part information can be obtained from the
factory by calling (816)222-2400.
Plumbing Requirements
Your unit requires the following plumbing connections:
 3/4” (19mm) or 1/2” (12 mm) hot and cold water supply lines.

One waste wate
r connection for each sink (minimum 1 1/2” / 38mm).

Installing PLUMBING PROFESSIONAL is responsible for complying
with all local plumbing codes.