Power Soak 31990 PS-100 Owner's Manual - Manual (Page 23)

19
Authorized Service Agency Section
Hazard to untrained or unauthorized personnel.
The following procedures are provided for use only by
an authorized service agency. No facility owner,
manager, employee or other unauthorized person
should attempt to perform any of these procedures. To
obtain the name of a recommended service agent in
your area, please call the Metcraft, Inc. Power Soak
Service Department at (816)222-2400.
When performing troubleshooting procedures, the
authorized service agency will need to open the Power
Soak system's main electrical enclosure.
Properly close the control panel before reconnecting
the circuits.