Nor-Lake Blast Chillers & Blast Chillers-Freezers - Manual (Page 14)

-- O OP PE ER RA AT TIIO ON N M MA AN NU UA AL L --
09/12 Rev. B 143573
14
Press menu/esc to select the desired menu
Programs
Use the keys up and down to display
Esc
Press enter to confirm your choice.
The display shows
IFR
Esc
Use the keys up and down to display Cooling
Esc
Press the start/stop button to immediately activate the cooling cycle
Keep menu/esc pressed for 5 seconds. The display Cancel progr
shows
Ok No
Press up. The display shows Rename progr
Ok No
A _ _ _ _ _ _
Press enter. The display shows
Esc
Type in the name of the program which is to be memorized using buttons to
scroll through the letters and numbers, and press to confirm and move on to the
next character.
Press menu/esc to confirm the new name
Press menu/esc to exit
PRE-COOLING CYCLE
It is advisable to run a cooling cycle prior to selecting any chilling cycle.
Once the temperature in the room reaches -13°F, the buzzer will sound for 10 seconds, and the “insert
Room -13°F
product” request will be displayed. Insert prod
Closing the door terminates the cooling cycle.
Note: From the main menu it is possible to immediately activate a cooling cycle; simply keep the button
pressed for 5 seconds.