HOUNO C, K & C-gas ovens - Manual (Page 29)

TROUBLESHOOTING
USER MANUAL C, K & C-GAS 29
TROUBLESHOOTING
If you experience issues with your oven, try the following solutions.
Error Code Problem Possible solution
3 Generator too hot The generator thermo switch has
tripped. Press the button under the
oven to reconnect.
4 Oven too hot The oven chamber thermo switch has
tripped. Press the button under the
oven to reconnect.
5 Fan too hot The thermo switch in the motor has
tripped. Wait for 10 minutes and then
retry.
6 Drain too hot The drain temperature has been above
75°C for more than 5 minutes. Check
that the water is turned on. Check that
the jet in the drain is working properly.
7 Oven sensor defective The temperature sensor in the oven is
not working. Contact authorized service
personnel.
8 Core temperature probe
not connected You have selected a program that uses
the core temperature probe, but the
probe has to be connected.
9 Generator sensor
defective The temperature sensor in the generator
is not working properly. Contact
authorized service personnel.
10 Drain sensor defective The sensor in the drain is now working
properly. You can still use the oven.
11 Water shortage The steam generator was not filled with
water within 2 minutes. Check that the
water is turned on. Contact authorized
service personnel.