Airlink101 APO1200 - Manual (Page 5)

4
3. Configuring the Access Point
Note :
1. It is recommended that you configure the Access Point from a wired computer. Before the Access Point can be
configured, if you connect the AP to your computer directly, you must manually assign a static IP address to your
computer's network adapter in the subnet of 192.168.2.x (Refer to Section 7, How to configure TCP/IP settings on
your PC.); if you connect the AP to your Router or Switch, since the AP’s default IP address is 192.168.2.254, make
sure your Router’s IP address is 192.168.2.x and no other network devices are assigned an IP address of
192.168.2.254.
2. Disable any anti-virus and firewall programs before configuring the access point.
1. Open the web browser (Internet Explorer or Mozilla
Firefox). Enter the AP’s default IP address
“http://192.168.2.254/” and click “GO”.
2. Enter “root” for user name and “default” for
password.
3. Click Wizard.
4. Select “AP” mode and click Next button.