Operating the computer [measuring screen, Enduro eng 4 power-saving function, Calorie consumption – CatEye CC-ED400 [Enduro] User Manual
Page 4: How to calculate the carbon offset, Switching computer function, How to change tire size, How to set clock, Starting/stopping measurement, Resetting data
ENDURO
ENG
4
Power-saving function
If the computer has not received a signal for 10 minutes, power-saving
screen will activate and only the clock will be displayed. When the com-
puter receives a sensor signal, the measuring screen reappears.
MODE
Calorie Consumption
This computer measures the calorie consumption by integrating the value
calculated from the speed in every second. Check it as a reference value.
Speed
10 km/h [mph]
20 km/h [mph]
30 km/h [mph]
Kcal per hour
67.3 kcal
[155.2 kcal]
244.5 kcal
[768.2 kcal]
641.6 kcal
[2297.2 kcal]
How to calculate the Carbon offset
The Carbon offset are calculated as follows.
Trip distance (km) x 0.15 = Carbon offset (kg)
* This factor of 0.15 is determined by applying the average value of the
overall gasoline-powered passenger cars in 2008 to the equation of the
“Carbon offset from 1 km drive of a gasoline-powered car” described
on the website of the Ministry of Land, Infrastructure and Transport and
Tourism.
Operating the computer [Measuring screen]
Switching computer function
Pressing the MODE button switches the measurement data at the bottom
in the order shown in the following fi gure.
*1 : When TM exceeds about 27 hours, or DST exceeds 999.99 km, .E
will appear. Reset the data.
Current speed
0.0 (4.0) – 199.9 km/h
[0.0 (3.0) – 124.9 mph]
Pace arrow
Indicates if the current speed is faster or
slower than the average speed.
( Faster, Slower)
Speed unit
Measuring screen
Power-saving screen
10 minutes
or
How to change tire size
Display the Total Distance (ODO) and press
the SET button to change the tire size.
The setting method is the same as for “Pre-
paring the computer-3” (page 3).
How to set clock
In the clock mode, press SET button on the
back, and the display enters clock setting
mode.
The setting method is the same as for “Pre-
paring the computer-4” (page 3).
TM
Elapsed Time
0:00.00 – 9:59.59
DST
Trip Distance
0.00 – 999.99 km [mile]
AV
Average Speed (*1)
0.0 – 199.9 km
[0.0 – 124.9 mph]
MX
Maximum Speed
0.0 – 199.9 km/h
[0.0 – 124.9 mph]
CAL
Calorie Consumption
0 – 99999 kcal
CO2
Carbon offset
0.00 – 999.99 kg
ODO
Total Distance
0 – 99999 km[mile]
Clock
0:00 – 23:59
[1:00 – 12:59]
MODE
(Press & hold)
SET
SET
Starting/Stopping measurement
Measurements start automatically when the bicycle is in motion.
During measurement, km/h or mph fl ashes.
START
STOP
Resetting data
Pressing and holding MODE on the measuring screen
returns the measurement data to 0.
* The total distance (ODO) is not reset.
Start measurement
Stop measurement