beautypg.com

Cc-vt220w urban wireless – CatEye CC-VT220W [Urban Wireless] User Manual

Page 3

background image

ENG

3

CC-VT220W URBAN WIRELESS

2-8-25, Kuwazu, Higashi Sumiyoshi-ku,

Osaka 546-0041 Japan

Attn: CATEYE Customer Service

Phone : (06)6719-6863

Fax

: (06)6719-6033

E-mail : [email protected]

URL : http://www.cateye.com

[For US Customers]
CATEYE AMERICA, INC.

2825 Wilderness Place Suite 1200, Boulder

CO80301-5494 USA

Phone : 303.443.4595

Toll Free : 800.5CATEYE

Fax

: 303.473.0006

E-mail : [email protected]

ETRTO

Tire size

L (cm)

40-254 14x1.50

102

47-254 14x1.75

110

40-305 16x1.50

119

47-305 16x1.75

120

54-305 16x2.00

125

28-349 16x1-1/8

129

37-349 16x1-3/8

130

32-369 17x1-1/4 (369)

134

40-355 18x1.50

134

47-355 18x1.75

135

32-406 20x1.25

145

35-406 20x1.35

146

40-406 20x1.50

149

47-406 20x1.75

152

50-406 20x1.95

157

28-451 20x1-1/8

155

37-451 20x1-3/8

162

37-501 22x1-3/8

177

40-501 22x1-1/2

179

47-507 24x1.75

189

50-507 24x2.00

193

54-507 24x2.125

197

25-520 24x1(520)

175

24x3/4 Tubuler

179

28-540 24x1-1/8

180

32-540 24x1-1/4

191

25-559 26x1(559)

191

32-559 26x1.25

195

37-559 26x1.40

201

40-559 26x1.50

201

47-559 26x1.75

202

50-559 26x1.95

205

54-559 26x2.10

207

57-559 26x2.125

207

58-559 26x2.35

208

75-559 26x3.00

217

28-590 26x1-1/8

197

37-590 26x1-3/8

207

37-584 26x1-1/2

210

650C Tubuler 26x7/8

192

20-571 650x20C

194

23-571 650x23C

194

25-571 650x25C 26x1(571)

195

40-590 650x38A

213

40-584 650x38B

211

25-630 27x1(630)

215

28-630 27x1-1/8

216

32-630 27x1-1/4

216

37-630 27x1-3/8

217

18-622 700x18C

207

19-622 700x19C

208

20-622 700x20C

209

23-622 700x23C

210

25-622 700x25C

211

28-622 700x28C

214

30-622 700x30C

215

32-622 700x32C

216

700C Tubuler

213

35-622 700x35C

217

38-622 700x38C

218

40-622 700x40C

220

42-622 700x42C

222

44-622 700x44C

224

45-622 700x45C

224

47-622 700x47C

227

54-622 29x2.1

229

60-622 29x2.3

233

This device complies with Part 15 of the FCC Rules. Operation is subject

to the following two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

Modifications The FCC requires the user to be notified that any

changes or modifications made to this device that are not expressly

approved by CatEye Co., Ltd. May void the user’s authority to operate

the equipment.

For the Quick start manual to install the unit on the

bicycle or set up the wristwatch, please visit our

website at http://www.cateye.com.

Before using the computer, please thor-

oughly read this manual and keep it for

future reference.

WARNING / CAUTION

Do not concentrate on the computer while riding. Ride safely!

Install the magnet, sensor, and bracket securely.

Check these periodically.

If a child swallows a battery, consult a doctor immediately.

Do not leave the computer in direct sunlight for a long

period of time.

Do not disassemble the computer.

Do not drop the computer to avoid malfunction or damage.

Tighten the dial on the FlexTight bracket by hand only.

Over-tightening can damage the bracket threads.

When cleaning the computer, bracket and sensor, do

not use thinners, benzene, or alcohol.

Dispose of used batteries according to local regulations.

LCD screen may be distorted when viewed through

polarized sunglass lenses.

Wireless Sensor

The sensor was designed to receive signals within a maxi-

mum range of 70 cm, to reduce chance of interference.

When adjusting the wireless sensor, note the following:

Signals cannot be received if the distance between the

sensor and the computer is too large.

The receiving distance may be shortened due to low

temperature and exhausted batteries.

Signals can be received only when the back of the

computer is facing the sensor.

Interference may occur, resulting in incorrect data, if

the computer is:

Near a TV, PC, radio, motor, or in a car or train.

Close to a railroad crossing, railway tracks, TV stations

and/or radar base.

Using with other wireless devices in close proximity.

Install the sensor and magnet

The distance between the computer and the sensor

must not exceed the transmission range of 70 cm.

The back of the computer must face the sensor.

The magnet passes through the sensor zone.

The clearance between the sensor and magnet is 5

mm or less.

The magnet may be installed anywhere on the spoke if the

*

above installation conditions are satisfied.

Element names

A

Current speed

B

Sensor signal icon

Flashes in synch with a sensor signal.

C

Speed unit km/h mph

D

Pace arrow

Indicates whether the current speed is faster ( ) or

slower ( ) than the average speed.

E

Selected mode

Indicates the data currently selected.

TM .......Elapsed Time

DST .......... Trip Distance

AV

*1

.....Average Speed MX ........... Maximum Speed

CAL ......Calorie Consumption CO2 .......... Carbon offset

ODO .....Total Distance

............. Clock

*1 When TM exceeds about 27 hours, or DST exceeds

999.99 km, .E will appear. Reset the data.

F

Battery case cover

Starting/Stopping measurement

Measurements start automatically when the bicycle is in

motion. During measurement, km/h or mph flashes.

Switching computer function

Pressing MODE switches the measurement data at the

bottom in the order of

OPERATION FLOW

.

Resetting data

Pressing and holding MODE on the measuring screen

returns the measurement data to 0.

The odometer is not reset.

Power-saving mode

If the computer has not received a signal for 10 minutes,

power-saving mode will activate and only the clock will be

displayed. When the computer receives a sensor signal, the

measuring screen reappears. If another 2 weeks’ inactivity

elapsed, SLEEP will be displayed on the screen. Pressing

the MODE in SLEEP mode brings up the measuring screen.

Calorie Consumption

*2

The calorie consumption data is only the accumulated

value that is calculated from the speed data of every

second. It differs from the actual consumed calorie.

Speed

10 km/h [mph] 20 km/h [mph] 30 km/h [mph]

Kcal per hour 67.3 kcal

[155.2 kcal]

244.5 kcal

[768.2 kcal]

641.6 kcal

[2297.2 kcal]

How to calculate the Carbon offset

*3

The Carbon offset are calculated as follows.

Trip distance (km) x 0.15 = Carbon offset (kg)

This factor of 0.15 is determined by applying the average value

*

of the overall gasoline-powered passenger cars in 2008 to the

equation of the “Carbon offset from 1km drive of a gasoline-

powered car” described on the website of the Ministry of Land,

Infrastructure and Transport and Tourism.

A

B

C

Maintenance

To clean the computer or accessories, use diluted neutral

detergent on a soft cloth, and wipe it off with a dry cloth.

Replacing the battery

Computer

When the display appears dim, or the computer hardly

receives a sensor signal, replace the battery. Install a new

lithium battery (CR2032) with the (+) side facing upward.

After replacing the computer battery, follow the proce-

*

dure described in

SETTING

.

Sensor

When the speed is not displayed even after

adjusting correctly, replace the battery. After replace-

ment, check the positions of the sensor and magnet.

Troubleshooting

The sensor signal icon does not flash (the speed is not displayed).

(Move the computer near the sensor, and turn the front wheel. If the

sensor signal icon flashes, this trouble may be a matter of transmission

distance due to battery drain, but not any malfunction.)

Check that the clearance between the sensor and magnet is not

too large. (Clearance: within 5 mm)

Check that the magnet passes through the sensor zone correctly.

Adjust the positions of the magnet and sensor.
Is the computer installed at the correct angle?

Back of computer must face toward the sensor.
Check that the distance between the computer and sensor is

correct. (Distance: within 20 to 70 cm)

Install the sensor within the specified range.
Is the computer or sensor battery weak?

In winter, battery performance diminishes.

Replace with new batteries. After replacement, follow the

procedure “Replacing the battery”.

No display.

Is battery in the computer run down?

Replace it with a new battery. After replacement, follow the

procedure described in

SETTING

.

Incorrect data appear.

Follow the procedure described in

SETTING

.

Specification

Battery

Computer : Lithium battery (CR2032) x 1

Sensor : Lithium battery (CR2032) x 1

Battery life

Computer : Approx. 1 year (If the computer is used for 1 hour/day; the

battery life will vary depending on the conditions of use.)

Sensor : Unit Total Distance reaches about 10000 km (6250 mile)

This is the average figure of being used under 20 °C temperature

*

and the distance between the computer and the sensor is 65 cm.

Controller ......4 bit, 1-chip microcomputer (Crystal controlled oscillator)

Display ..........Liquid crystal display

Sensor ...........No contact magnetic sensor

Transmission distance ...Between 20 and 70 cm

Tire size to be selected

.....................26”, 700c, 27”, 16”, 18”, 20”, 22” and 24”, or tire

circumference of 100 cm - 299 cm (initial value: 26 inch)

Working temperature

............32 °F - 104 °F (0 °C - 40 °C) (This product will not display appropri-

ately when exceeding the Working Temperature range. Slow response

or black LCD at lower or higher temperature may happen respectively.)

Dimensions/weight

Computer : 2-3/16” x 1-15/32” x 5/32” (55.5 x 37.5 x 18.5 mm) / 0.99 oz (28 g)

Sensor : 1-41/64” x 1-3/8” x 19/32” (41.5 x 35 x 15 mm) / 0.53 oz (15 g)

The factory-loaded battery life might be shorter than the above-

*

mentioned specification.

The specifications and design are subject to change without notice.

*

LIMITED WARRANTY

2-Year Computer/Sensor only (Accessories/Bracket sensor and Battery

Consumption excluded)

CatEye cycle computers are warranted to be free of defects from materi-

als and workmanship for a period of two years from original purchase. If

the product fails to work due to normal use, CatEye will repair or replace

the defect at no charge. Service must be performed by CatEye or an

authorized retailer. To return the product, pack it carefully and enclose the

warranty certificate (proof or purchase) with instruction for repair. Please

write or type your name and address clearly on the warranty certificate.

Insurance, handling and transportation charges to CatEye shall be borne

by person desiring service.

For UK and REPUBLIC OF IRELAND consumers, please return to the

place of purchase. This does not affect your statutory rights.

STANDARD PARTS

#160-2190N

: Parts kit

#160-2196

: Speed sensor

#160-0280N

: Bracket band

Option parts

#160-2980

: Nylon tie bracket

#160-2193

: Bracket

#166-5150

: Lithium battery (CR2032)

#169-9691N

: Wheel magnet