Alamo SHD88 - Manual (Page 90)

OPERATION
SHD 03/09 Operation Section 4-4
© 2009 Alamo Group Inc.
OPERA
T
ION
SHD 88 SHD 96
Horsepower Required (Min.) 40HP 50HP
Tractor PTO 540 RPM 540 RPM
Cutting Capacity 1” 1”
Cutting Height 1/2 - 6” 1/2 - 6”
Cutting Width 88” 96”
Overall Width 96” 103”
Overall Length 40” 40”
Weight (Approximate) 1035 lbs 1170 lbs
Hitch CAT I-II CAT I-II
Blades Fine or Coarse Cut Fine or Coarse Cut
Number of Knives Fine Cut 108 pair Fine Cut 118 pair
Coarse Cut 44 pair Coarse Cut 48 pair
Blade Rotation Forward Forward
Cuttershaft Diameter 4-1/2 4-1/2
Gearbox Rating 60HP 60HP
Knife Tip Speed (FPM) 8900 8900
Driveline Size CAT 4 CAT 4
Driveline Protection Slip Clutch Slip Clutch
Drive Belt “C” Size “C” Size
Deck Thickness 10 Ga. 10 Ga.
Rear Roller Diameter 6” 6”
Skid Shoe STD STD
The Mower is designed for certain mowing applications and is rated to cut up to a specific
size vegetation (see Mower Standard Equipment and Specifications). DO NOT use this
mower to cut vegetation above the Mower’s rated capacity or to cut any type of non-
vegetative material. Only operate this Mower on a properly sized and equipped Tractor.
Operating this Mower in an application for which it is not designed and/or operating the
Mower with the wrong size Tractor can cause Mower component damage and equipment
failure resulting in possible serious injury or death.
(SGM-14)