Autostart AS-6450VTW-FM - Manual (Page 7)

User Guide P. 7
SHIFT ¾ SHIFT ¾ START/STOP : ............... 2 nd car start/stop
SHIFT ¾ SHIFT ¾ TRUNK : ....................... 2 nd car trunk
Customized Features (press the SHIFT button 3X)
(May not be applicable for certain vehicles)
Your installer can add customized features such as turning on the radio, opening sliding doors, etc.
SHIFT ¾ SHIFT ¾ SHIFT ¾...................... LOCK : customized feature 1
SHIFT ¾ SHIFT ¾ SHIFT ¾...................... UNLOCK : customized feature 2
SHIFT ¾ SHIFT ¾ SHIFT ¾...................... TRUNK : customized feature 3
SHIFT ¾ SHIFT ¾ SHIFT ¾...................... START/STOP : customized feature 4
Setting Transmitter Features (press the SHIFT button 4X)
By default, the multi-level features are programmed as follows:
x Level 1 (Basic Features)
x Level 2 (Multi car operation)
x Level 3 (Customized Features)
x To access a feature that is programmed as level 1, press the SHIFT button once followed by the
desired function.
x To access a feature that is programmed as level 2, press the SHIFT button twice followed by the
desired function.
x To access a feature that is programmed as level 3, press the SHIFT button three times followed
by the desired function.
Your installer can customize these multi-level features to best suit you. Your options are:
Option 1:
Level 1 (requires pressing the SHIFT button 1X) Æ Multi car operation
Level 2 (requires pressing the SHIFT button 2X) Æ Basic features
Level 3 (requires pressing the SHIFT button 3X) Æ Customized features
Option 2:
Level 1 (requires pressing the SHIFT button 1X) Æ Basic features
Level 2 (requires pressing the SHIFT button 2X) Æ Multi car operation
Level 3 (requires pressing the SHIFT button 3X) Æ Customized features
Option 3:
Level 1 (requires pressing the SHIFT button 1X) Æ Customized features
Level 2 (requires pressing the SHIFT button 2X) Æ Multi car operation
Level 3 (requires pressing the SHIFT button 3X) Æ Basic features
Option 4:
Level 1 (requires pressing the SHIFT button 1X) Æ Basic features
Level 2 (requires pressing the SHIFT button 2X) Æ Customized features
Level 3 ( requires pressing the SHIFT button 3X) Æ Multi car operation
Example: If the multi-level features were set to option 3, the setup would be as follows:
x Level 1 Æ Customized feature
x Level 2 Æ Multi car operation
x Level 3 Æ Basic features
The “Basic features” are now programmed as level 3 and therefore:
x
To access the AUX 2 feature, the user needs to press on the SHIFT button three (3) times followed
by the LOCK button.
x To access the status request feature, the user needs to press on the SHIFT button three (3)
times followed by the TRUNK button.
x To access cold weather mode, the user needs to press on the SHIFT button three (3) times
followed by the START/STOP button.