Vehicle status request – Autostart AS-6450VTW-FM User Manual
Page 4
P. 4 User
Guide
Vehicle Status Request
The status request feature allows the user to see the status of the vehicle
i.e.: if the doors are
locked or unlocked or if the vehicle is in cold weather mode, home valet mode, in valet mode or
how much time is left in the run time cycle. The following charts (Tables 1, 2 and 3) indicate the
confirmation sequences.
To retrieve the vehicle status:
Press and release the
SHIFT
button then press and release the
TRUNK
button (there will be a beep).
The transmitter will then flash the corresponding sequence of LEDs depending on the vehicle’s
status.
x
If the engine is NOT running, refer to Table 1.
x
If the engine IS running under a remote start, refer to Table 2 (if the doors are locked)
or refer to Table 3 (if the doors are unlocked).
The status request feature has 2 stages:
• The first stage of flashes denotes if the vehicle’s doors are locked or unlocked.
• The second stage of flashes (when applicable) denotes the vehicle status.
Status Request When the Engine is NOT Running and Ready Mode is
Engaged
Status
Stage
LED #1
LED #2
LED #3
LED #4
Beep(s)
Lock 3 flashes
1
Unlock
3
flashes
2
1
st
stage if
locked
3 flashes
2
1
st
stage if
unlocked
3
flashes
2
Cold
Weather
2
nd
stage
1
second
1
st
stage if
locked
3 flashes
2
1
st
stage if
unlocked
3
flashes
2
Home
Valet
2
nd
stage
1 second
1 second
1
st
stage if
locked
3 flashes
1
1
st
stage if
unlocked
3
flashes
1
Valet
Mode
2
nd
stage
1 second
1 second
1
st
stage if
locked
3 flashes
4
1
st
stage if
unlocked
3
flashes
4
Out of Ready
Mode
2
nd
stage
4
flashes
Table 1