A&D Digital Platform Scales HW-10KGV - Manual (Page 64)

HW-G Instruction Manual Page 62
HW-G OZIM v1a
17.3 Internal Printer for Type V (OP-06)
It is necessary to set the parameter of the “Print mode (
f9
)” in the function table in
advance.
It is necessary to set the parameter of the “Date (
f16
)” on the function table in advance.
Caution The date Parameter is not updated automatically.
Specification
Kind 5x7 dot matrix impact type
Characters 16 characters per line
Width of roll paper 44.5mm
Accessories
a special roll paper, an ink ribbon
Consumables
Special roll paper AX-PP156-S (Including 8 rolls in a set)
Ink ribbon AX-ERC-05-S (Including 5 pieces in a set)
Operation and Print Samples
Pressing the F switch while pressing and holding the PRINT switch, paper feed is
performed.
Print sample of selecting print mode
f9 1
~
f9 4
Print sample of selecting print mode
f9 5
Print sample of displayed accumulation data
2.345 kg
2345pc
76.98%
99/12/31
001 1.345 kg
002 1.325 kg
1.330 kg
99/12/31
N 3
Total
7.810 kg