A&D Digital Platform Scales HW-10KGV User Manual
Page 60
HW-G Instruction Manual Page 58
HW-G OZIM v1a
Circuit
Caution
Please confirm that the AC adaptor type is correct for your local voltage
and receptacle type.
Selection switch for the RS-422/ RS-485 interface
Selects either of RS-422 or RS-485 interface using a switch on the board.
Installing OP-04
Step 1
Remove two screws that
attach the RS232C board on
the rear of the display unit.
Remove the RS232C board.
Step 2
Switch the connections.
Step 3
Insert the option board into the
display unit and afix with the
screws