Panasonic KXTG7431 - Manual (Page 18)

Programming
18 For assistance, please visit http://www.panasonic.com/help
Programmable settings
You can customize the unit by programming the following features using the handset.
To access the features, there are 2 methods:
– scrolling through the display menus (page 18)
– using the direct commands (page 20)
L Direct command is the main method used in these operating instructions.
Programming by scrolling through the display menus
1
{ MENU} (center of joystick)
2 Select the desired top-menu by pushing the joystick in any direction. i
{
SELECT}
3 Push the joystick down or up to select the desired item in sub-menu 1. i
{
SELECT}
L
In some cases, you may need to select from sub-menu 2. i {SELECT}
4 Push the joystick down or up to select the desired setting. i {SAVE}
L
This step may vary depending on the feature being programmed.
L To exit the operation, press {OFF}.
Note:
L
See page 20 for the default settings.
Main menu Sub-menu 1 Sub-menu 2 Page
Caller list
W – – 28
Answering device
s Message list – 32
Play new msg. – 32
Play all msg. – 32
Erase all msg.
*1 – 33
Greeting Record greeting
*1 31
Check greeting 31
Pre-recorded *1 31
Settings Ring count
*1 34
Recording time
*1 35
Remote code
*1 33
Answer on
*1 – 30
Answer off
*1 – 30
V.M. access
# – – 37
TG743x(e).book Page 18 Monday, December 8, 2008 1:36 PM